SOLD - $20,000 - Three Inch Ordnance Cannon
Custom built out of white Oak, all metal is custom made
Hurn barrel, estimate weight is 850 pounds
Implements are new, made by Steen Cannon
Carriage was made by a firearms engraver in Kentucky who added the brass accents
Price does not include deliv..
SOLD - $20,000 - Three Inch Ordnance Cannon
Custom built out of wh...
Tisdel Swivel Breech Rifle
Serial number 287
.32-40 WCF
SOLD - $2495
Luther Weston Tisdel was a gunsmith in Scranton, Pennsylvania. He was born on July 25, 1829 in Lake Ariel, Wayne County, Pennsylvania. He died on February 19, 1906 in Scranton, Lackawanna County, Pennsylvani..
Tisdel Swivel Breech Rifle
Serial number 287
.32-40 WCF
SO...
SOLD - $550 - U.S. 1880 Entrenching Tool
8 inch long and 3 1/2 inch wide blade with turned spine, ribbed wood grip
Blade has small nicks along the edge in a few places
Grip marked US
Leather covered "U.S." marked sheath with brass throat and hanging ring
Stitching and metal on scabbard is ..
SOLD - $550 - U.S. 1880 Entrenching Tool
8 inch long and 3 1/2 inc...
SOLD - $1600 - U.S. Model 1822 Springfield Armory Flintlock Musket
SPRING over FIELD over 1830 on the rear of the lockplate, Eagle over U.S. in front of the cock. Rear swivel intact on front of the trigger guard, front swivel is missing. All hardware is iron except brass pan, U.S. on..
SOLD - $1600 - U.S. Model 1822 Springfield Armory Flintlo...
SOLD $695 - U.S. Model 1836 Flintlock Pistol
Standard Model 1836 .54 caliber single-shot flintlock martial pistol in original flint. Iron furniture, finished bright. Brass detachable pan with high fence. Round smoothbore barrel is 8 ½" long and finished bright. The barrel is stamped U.S. / NWP / ..
SOLD $695 - U.S. Model 1836 Flintlock Pistol
Standard Model 1836...
SOLD - $750 U.S. Model 1855 Saber Bayonet with scabbard and leather frog
Maker unknown
M1855 saber bayonet was issued to fit the new United States Percussion Model 1855 Rifle.
Brass handle is marked with the letter L
..
SOLD - $750 U.S. Model 1855 Saber Bayonet with scabbard and leather...
SOLD - $695 - Model 1873 Trowel Bayonet with No. 2 Scabbard
Made by Springfield Armory
Polished blade is 9 7/8 inches long, 3 1/2 inches wide
Fits the 45/70 Trapdoor Rifle
Original Walnut Chillingworth handle
No. 2 Leather Scabbard stitching and metal is tight
Leather is cracking and in n..
SOLD - $695 - Model 1873 Trowel Bayonet with No. 2 Scabbard
M...
SOLD - $1995 Manufactured for trial in 1900 with the idea of having a bayonet which could double as a brush knife.
13 3/4 inches overall, with a 9 inch clip point blade.
A.J. stamped on guard
"US" is stamped on the right ricasso with "1900" on the left. Smooth wood grips, with polished steel cros..
SOLD - $1995 Manufactured for trial in 1900 with the idea of having...
SOLD - $495 - U.S. Model 1904 Hospital Corps Knife
Dated 1909 Springfield Armory
S.A. over ordnance bomb over 1909
Reverse marked U.S. over serial number 9025
Very sharp edge
Walnut and brass handle is very tight
Type 2 scabbard marked Rock Island Arsenal 1911 with Inspector's mark H.E.K. and ..
SOLD - $495 - U.S. Model 1904 Hospital Corps Knife
Dated 1909 Spri...
SOLD - $250 - U.S. M1909 Springfield Armory Bolo
S.A. over Ordnance bomb over 1910 marked on the blade
Reverse marked U.S. but heavily worn
Walnut wood grips are tight, crack in the wood at rear pin
Brass pommel is tight
..
SOLD - $250 - U.S. M1909 Springfield Armory Bolo
S.A. over Ordnanc...
SOLD $250 - U.S. Model 1910 Bolo with original scabbard
Made by Plumb
Marked U.S. Mod over 1917 C.T.
Reverse marked PLUMB over St. Louis over serial number
Factory edge and finish
Walnut wood grips are tight
Type No. 1 Scabbard is wood covered with webbing with leather tip
All stitching..
SOLD $250 - U.S. Model 1910 Bolo with original scabbard
Made by Pl...
SOLD - $650 U.S.N. M1870 Springfield Rolling Block Rifle Bayonet
Straight spear pointed blade with brass fish scaled handle
Crossed cannon on both sides of handle
Mass is stamped on blade, Ames Mfg. has been rubbed off only showing the state
Other side is stamped G.G.S. 1873 for the inspector an..
SOLD - $650 U.S.N. M1870 Springfield Rolling Block Rifle Bayonet
S...
SOLD - $1995 - This is the first true US adopted knife bayonet and was designed by Admiral John Dahlgren as a replacement for the sword pattern bayonets then used on the 1861 Plymouth Rifle. Measuring 16 5/8 inches overall, with a 12 inch asymmetrical clip point blade, marked "USN/D.R/1863" on ..
SOLD - $1995 - This is the first true US adopted knife bayonet and ...
SOLD $895 Unertl 10x Plain Head Scope
1 1/2 inch plain head
1 inch tube
Standard black dehorned mounts
Standard recoil spring and clamp
Serial number 19632
19 3/4 inches long
Both end caps
Medium crosshairs
..
SOLD $895 Unertl 10x Plain Head Scope
1 1/2 inch plain head
1 inc...
SOLD - $1295 - Unertl 12x Target Scope
Standard Unertl mounts
Standard recoil mount
Fine Crosshairs
Eye piece end cap has hole drilled in it
Both end caps
25 inches long
3/4 tube
Serial number 32936 (circa early 1950s)
..
SOLD - $1295 - Unertl 12x Target Scope
Standard Unertl mounts
Sta...
SOLD - $1295 Unertl 20x Target Calibrated Head Scope
1 1/2 inch calibrated head
3/4 Tube
Both lens caps
Unertl standard black mounts, clicks are nice and crisp, not mushy
Serial number 73878
Standard recoil spring and clamp
Medium crosshairs
26 inches long
Excellent condition, only wear ..
SOLD - $1295 Unertl 20x Target Calibrated Head Scope
1 1/2 inch ca...
SOLD - $1695 - Unertl 24X Target Scope with very fine crosshairs and center dot
26" overall length
1" tube
POSA mounts, does not have the mounting cups on the tightening screws
Has end caps
serial 56663
..
SOLD - $1695 - Unertl 24X Target Scope with very fine crosshairs an...
SOLD - $895 - Unertl 8X Plainhead Scope
Serial number 19559
Thin crosshairs
7/8" tube, 19 1/2" overall
Standard mounts
Not sure distance the scope is set
sticker on one end cap, can be removed
..
SOLD - $895 - Unertl 8X Plainhead Scope
Serial number 19559
...